Dollar Extending Recovery, Turning Around the Corner

News

Dollar starts the month with a much firmer footing, trading broadly higher as the strongest one so far. The rally is particular against Swiss Franc, which is currently the weakest one. Yet the greenback will firstly need to overcome some near term technical levels to convince traders about its underlying strength. Secondly, Dollar will face some tests from key economic data this week, starting from ISM manufacturing index today, and then ISM services and non-farm payroll later in the week. We’ll see if it’s finally turning the corner.

Technically, some levels need to be taken out to confirm the sustainability of Dollar’s rebound. The levels include 1.1698 minor support in EUR/USD, 1.3013 minor support in GBP/USD, 0.7063 support in AUD/USD and 1.3459 minor resistance in USD/CAD. Also, gold will need to confirm short term topping in record high of 1988 and break 1939.20 minor support.

In Europe, currently, FTSE is up 1.37%. DAX is up 2.30%. CAC is up 1.45%. German 10-year yield is up 0.009 at -0.513. Earlier in Asia, Nikkei rose 2.24%. Hong Kong HSI dropped -0.56%. China Shanghai SSE rose 1.75%. Singapore Strait Times dropped -1.78%. Japan 10-year JGB yield rose 0.0108 to 0.024.

– advertisement –

Eurozone PMI manufacturing finalized at 51.8, August to see further output gains

Eurozone PMI Manufacturing is finalized at 51.8 in July, up from April’s 47.4. It’s also the first growth reading in a year-and-a-half with demand continued to recovery with further easing of coronavirus restrictions. Growth was widespread too, with all market groups registering above 50 readings.

Looking at some member states, Spain hit 27-month at 53.5. Austria hit 19-month high 52.8. France hit 22-month high at 52.4. Italy hit 25-month high at 51.9. Germany also hit 19-month high at 51.0. But Greece and the Netherlands stayed in contraction at 48.6 and 47.9 respectively.

Chris Williamson, Chief Business Economist at IHS Markit said: “Eurozone factories reported a very positive start to the third quarter, with production growing at the fastest rate for over two years, fuelled by an encouraging surge in demand. Growth of new orders in fact outpaced production, hinting strongly that August should see further output gains…

“Increased unemployment, job insecurity, second waves of virus infections and ongoing social distancing measures will inevitably restrain the recovery. The next few months numbers will therefore be all important in assessing whether the recent uplift in demand can be sustained, helping firms recover lost production and alleviating some of the need for further cost cutting going forward.”

Also released, Swiss CPI in at -0.2% om, -0.9% yoy in July, above expectation of -0.4% mom, -1.3% yoy. SVME PMI rose to 49.2 in July, up from 41.9, but missed expectation of 50.0.

UK PMI manufacturing finalized at 53.3, started Q3 on firmer footing

UK PMI Manufacturing was finalized at 53.3 in July, up from 50.1 in June. That’s also the highest level in 16 months. Markit noted that domestic new orders rise but new exports business falls. but business sentiment still rises to 28-month high.

Rob Dobson, Director at IHS Markit: “The UK manufacturing sector started the third quarter on a much firmer footing, with output growth hitting a near three-year high and new orders rising for the first time in five months. The recovery strengthened as a loosening of lockdown restrictions allowed manufacturers to restart or raise production. July also saw signs of furloughed employees returning to work and customers resuming spending. Business optimism also rose to its highest for over two years as companies grew more hopeful that the future has brightened.

“Despite the solid start to the recovery, the road left to travel remains long and precarious. An extended period of growth is still needed to fully recoup the ground lost in recent months. This is also the case for the labour market, where job losses are continuing despite businesses reopening. There is a significant risk of further redundancies and of furloughed workers not returning unless demand and confidence stage more substantial and long-lasting rebounds in the months ahead.”

Australia AiG manufacturing rose to 53.5, but headwinds lie ahead

Australia AiG Performance of Manufacturing Index rose 2.0 pts to 53.5 in July, indicating a “more convincing expansion”. Manufacturing has now “landed in positive territory” for two straight months for the first time since October 2019. Six of the seven activity indices but exports deteriorated by -5.8 to 41.4, staying gin contraction. Also, four of six sectors stayed in contraction in trend terms, except food & beverages and machinery & equipment.

Ai Group Chief Executive Innes Willox said: “Against the positive signs from the manufacturing sector, the winding down of stimulus from September, the impact of the Melbourne lockdown and the severity of the outbreak, as well as tougher border restrictions are likely to weigh on the sector in coming months”.

China Caixin PMI manufacturing rose to 52.8, strongest upturn since 2011

China Caixin PMI Manufacturing rose to 52.8 in July, up from 51.2, beat expectation of 51.3. Caixin said the data “signal a further improvement in the health of China’s manufacturing economy”. Also, “operating conditions have now improved in each of the past three months, with the latest upturn the strongest since January 2011.”

Wang Zhe, Senior Economist at Caixin Insight Group said: “Overall, flare-ups of the epidemic in some regions did not hurt the improving trend of the manufacturing economy, which continued to recover as more epidemic control measures were lifted. The supply and demand sides both improved, with relevant indicators maintaining strong momentum. However, we still need to pay attention to the weakness in both employment and overseas demand.”

Japan PMI manufacturing finalized at 45.2, consumer goods stabilized, capital goods worst performing

Japan PMI Manufacturing was finalized at 45.2 in July, up form June’s 40.1. That’s the highest reading since February. while it still stayed below neutral 50, it’s already notably better than the 11-year low of 38.4 reached in April. Markit also said down turn in output eases sharply in comparison in Q2. New orders decline to the smallest extent in five months. Business expectations also continue to rebound.

Tim Moore, Director at IHS Markit, said: “Japan’s manufacturing sector remained severely impacted by the COVID-19 pandemic and subsequent downturn in worldwide economic conditions. However, the headline PMI recovered some of the ground lost in the second quarter, helped by the smallest declines in output and new orders for five months during July.

“Production of consumer goods was close to stabilisation in July, despite a headwind from weaker orders from abroad… Capital goods was the worst-performing segment for export sales, highlighting that reduced global investment spending and constrained trade flows are holding back the Japanese manufacturing sector.”

Q1 GDP contraction was finalized at -0.6% qoq, unchanged from prior estimate. Annualized, GDP contracted -2.2%. Looking at some details, capital expenditure rose 1.7% qoq. External demand dropped -0.2% qoq. Private consumption dropped -0.8% qoq. GDP price index rose 0.9% yoy.

USD/JPY Mid-Day Outlook

Daily Pivots: (S1) 104.73; (P) 105.40; (R1) 106.60; More...

Intraday bias in USD/JPY remains on the upside at this point. Sustained trading above 106.07 support turned resistance should confirm short term bottoming at 104.18. More importantly, whole corrective decline from 111.71 has completed with three waves down to 104.18, just missed 100% projection of 111.71 to 105.98 from 109.85 at 104.12. In the case, further rise should be seen to 108.16 resistance next.

In the bigger picture, USD/JPY is still staying in long term falling channel that started back in 118.65 (Dec. 2016). Hence, there is no clear indication of trend reversal yet. The down trend could still extend through 101.18 low. However, sustained break of 112.22 should confirm completion of the down trend and turn outlook bullish for 118.65 and above.

Economic Indicators Update

GMT Ccy Events Actual Forecast Previous Revised
22:30 AUD AiG Performance of Mfg Index Jul 53.5 51.5
23:50 JPY GDP Q/Q Q1 F -0.60% -0.70% -0.60%
0:30 JPY Manufacturing PMI Jul F 45.2 42.6 42.6
1:00 AUD TD Securities Inflation M/M Jul 0.90% 0.60%
1:45 CNY Caixin Manufacturing PMI Jul 52.8 51.3 51.2
6:30 CHF CPI M/M Jul -0.20% -0.40% 0.00%
6:30 CHF CPI Y/Y Jul -0.90% -1.30% -1.30%
7:30 CHF SVME PMI Jul 49.2 50 41.9
7:45 EUR Italy Manufacturing PMI Jul 51.9 51.3 47.5
7:50 EUR France Manufacturing PMI Jul F 52.4 52 52
7:55 EUR Germany Manufacturing PMI Jul F 51 50 50
8:00 EUR Eurozone Manufacturing PMI Jul F 51.8 51.1 51.1
8:30 GBP Manufacturing PMI Jul F 53.3 53.6 53.6
13:45 USD Manufacturing PMI Jul F 51.3 51.3
14:00 USD ISM Manufacturing PMI Jul 54 52.6
14:00 USD ISM Manufacturing Prices Paid Jul 60 51.3
14:00 USD ISM Manufacturing Employment Index Jul 42.1
14:00 USD Construction Spending M/M Jun -0.50% -2.10%

Articles You May Like

Lowe’s beats on earnings and hikes guidance, but still expects sales to fall this year
Home Depot’s sales are improving, but it says consumers are still cautious about spending
Yen and Swiss Franc Climb as Ukraine War Intensifies on 1000th Day
Gold bulls ready to rumble again?
Silver Price Forecast: XAG/USD remains bearish biased, dips below $30.30

Leave a Reply

Your email address will not be published. Required fields are marked *